试验室XBSL型立式砂泵技术参数
Technical Parameters of Laboratory
XBSL Vertical Sand Pump

XBSL型立式砂泵主要用于实验室输送矿浆和排尾矿，也可用于选煤厂输送介质，铝厂输送高温易结晶的料浆以及水泥厂输送料等物料。本产品由原地矿部唯一指定企业生产，执行行业标准。

XBSL型立式砂泵由泵体、轴承座、立轴之下端固体连接叶轮在滚动轴承中旋转。轴承座的两端被压盖和滚动轴承压紧，同时必须将轴承的润滑油封住不漏，泵体内上装有电动机支架及电动机，通过三角带传动叶轮在泵室内旋转，利用叶轮的压力把矿浆压出。为了防止矿砂渗入轴承在主轴上装有离心轮。

XBSL Vertical Sand Pump is to convey mineral slurry and discharge tailings as well as transport medium for coal washery and high temperature, easy- crystal slurry for aluminum plant and materials for cement factory. The product is made by the only manufacturer designated by the former Ministry of Geology and Mineral Resources, in compliance with the Industrial standards.

XBSL Vertical Sand Pump is operated by rolling bearings on the solid connecting impeller at the lower end of pump body, bearing choke and vertical shaft. The both ends of bearing choke are compressed by gland and rolling bearing and lube oil for bearing shall be sealed off without leakage. Electric motor and its support are installed in the pump to be operational by triangle belt driving impeller in pump room and to force out slurry using pressure of impeller. A centrifugal wheel is provided on the main shaft to prevent ore sand from being infiltrated into the bearings.