|
|
GF型粗颗粒浮选机 Mechanical
agitating flotation machine
该浮选机为粗颗粒浮选机,适用于选别有色、黑色、贵金属和非金属矿物的中、小型企业,所处理的物料粒度范围为0.74mm点45%-98%,矿浆浓度<45%。其特点是:自吸空气量可达1.2m3/㎡·min;自吸矿浆能从机外自吸给矿和泡沫江中矿,浮选机作业间可平面配置;槽内矿浆循环好,液面平稳,槽内矿浆无旋转现象,无翻花;分选效率高,提高粗粒和细粒矿物的回收率;功耗低,比同规格的同类浮选机节省功耗15%-20%,同时又能吸入足量的空气和矿浆;易损件寿命长,特别是叶轮、定子的寿命比同类浮选机延长一倍以上。
This type of flotation machine is coarse-grained flotation machine
which applies to medium and small-sized enterprises sorting nonferrous metal,
ferrous metal, precious metal and non-metallic ores. The particle size range of
the materials it treats is 0.74mm,
the 45%-98% and the slurry concentration is <45%. Its characteristics are: The self-absorption air amount can
reach 1.2m3/㎡·min; the self-suction slurry can automatically
suck slurry to the ore and middling ore from outside the machine. The operating
workshop of flotation machine can be allocated horizontally. The circulation of
slurry in tank is good; the liquid surface is flat; the slurry in the tank does
not rotate or roll; the separation efficiency is high and the recovery ratio of
coarse-grained minerals and fine-grained minerals is raised; the power
consumption is low (compared with similar flotation machines of the same
specifications, this type of flotation machine can save 15% to 20% of power);
besides, it can suction a sufficient amount of air and slurry; the service life
of easily damaged parts is long (the service life of vanes and rotors is
especially long. It is more than double the service life of the same type of
flotation machine.
型号规格 Model |
容积 Volume |
槽体尺寸 cell size |
安装功率 Power |
处理能力 capacity |
刮板电机功率 power |
空气吸入量 Air flow sucked |
单槽质量 singe cell weight |
m3 |
mm |
kw |
m3/min |
kw |
m3/m2min |
kg |
GF-0.35 |
0.35 |
700×700×730 |
1.5 |
0.1-0.2 |
0.75 |
1.2 |
470 |
GF-0.7 |
0.7 |
900×900×900 |
3 |
0.1-0.4 |
1.1 |
1.2 |
932 |
GF-1.1 |
1.1 |
1100×1100×1000 |
5 |
0.2-0.5 |
1.1 |
1.2 |
1370 |
GF-2 |
2 |
1400×1400×1150 |
7.5 |
0.3-1.0 |
1.5 |
1.2 |
1750 |
GF-3 |
3 |
1500×1850×1200 |
11 |
0.5-1.5 |
1.5 |
1.2 |
2230 |
GF-4 |
4 |
1600×2150×1250 |
15 |
0.5-2 |
1.5 |
1.2 |
2585 |
GF-6 |
6 |
2000×2500×1300 |
22 |
1-3 |
1.5 |
1.2 |
3300 |
GF-8 |
8 |
2200×2900×1400 |
30 |
1-4 |
1.5 |
1.2 |
4130 |
GF-10 |
10 |
2200×2900×1700 |
30 |
2-6 |
1.5 |
1.2 |
4500 |
GF-16 |
16 |
2850×3800×1700 |
45 |
3-8 |
2.2 |
1.2 |
8320 |
GF-20 |
20 |
2850×3800×2000 |
45 |
4-10 |
2.2 |
1.2 |
8670 |
GF-24 |
24 |
3150×4150×2000 |
55 |
5-12 |
2.2 |
1.2 |
8970 |
GF-28 |
28 |
3150×4150×2300 |
55 |
5-14 |
2.2 |
1.2 |
9480 |
GF-42 |
42 |
3600×4800×2650 |
75 |
8-20 |
3 |
1.2 |
19400 |
| |